Inicio / todos / Welding Equipment / MIG Welders /

PROMIG-500SYN DPulse Heavy Industrial High Speed Pulse MIG Welder

PROMIG-500SYN DPulse Heavy Industrial High Speed Pulse MIG Welder

PROMIG-500SYN DPulse Heavy Industrial High Speed Pulse MIG Welder

The PROMIG-500SYN DPulse is designed for heavy industrial, 500A@100% duty cycle.
CategoríaMIG Welders
MarcaTOPWELL
Input Voltage3PH ~ 400V ±15%
Rated Output(40℃) 100%MIG: 500A/39V
FeaturesHigh Speed Pulse, Ultra Low Spatters, Hybrid Pulse
Bajar DOCpdf icondoc iconxls iconrar icon
Tiempo de Actualización2024/3/29
Información Detallada
DETAILS
ULTRA HIGH DEPOSITION RATE, ULTRA HIGH WELDING PERFORMANCE
PROMIG-500SYN DPulse

Heavy Industrial Design - 500A @ 100% Duty cycle.
Pulse & Double Pulse MIG Process - Welds Mild steel, Stainless Steel, 4XXX and 5XXX series aluminum for superior quality welding.
(HSP) High Speed Pulse MIG - Improve the Welding Efficiency Up-to 48%.
(HPC) Hybrid Pulse Control - Great performance for all pipe welding solutions.
(ULS) Ultra Low Spatters- Up to 75% less spatter.
HSP—High Speed Pulse Technology
Specifically designed for demanding workshop use, the deposition rate can increase 25~30% for various materials, whether used in manufacturing thick materials or sheet metal. 

The High Speed Pulse (HSP) process enables you to save time, money, and energy compared to traditional pulse welding. This process is ready to raise pulse welding to a whole new level!

In general, One pulse melt one droplet, but we increase the submission of these droplets by TOPWELL's New High Speed pulse process.The transition will be faster, narrower HAZ zone and deeper penetration!
GET HIGHER WELDING STRENGTH
Deeper penetration, No Undercut defects, Higher strength.
HSP VERTICAL-UP WELDING PROCESS
The HSP optimised for fillet welds (FW) completed using PF welding (in vertical up position), can also be used to great benefit in other weld positions. For Topwell ProMIG Series, HSP is approx 70 % faster, an enormous progress for everyone welding a vertical seam. A whole new level!

No need to swing! No undercuts or other defects! The speed of PF welding by HSP is twice that of the traditional pulse welding.

Double Pulse MIG process 


No need to swing, You can easily get a cosmetically pleasing weld seam, with significantly lower and more controller heat input into the workpiece. It results in much lower distortion and less rework, very suitable for welding the thin Aluminum or S.S sheets.


By High-Speed Double Pulse process, the heat input of arc is alternating, effectively reducing the heat input of base metal. It reduces the occurrence of welding defects such as crack.
HPC—Hybrid Pulse Control
(HPC) Hybrid Pulse Control is TOPWELL unique technology, it mixes Pulse (spray arc) and short-circuit transfer types in one duty cycle. With the outstanding process, it keeps the advantage of both transfer types and provides a great performance for all pipe welding solutions. Vertical-up positions are also highly recommended.

ULS—Ultra Low Spatters
Short Arc is a wire transfer method which is frequently used for welding thin materials less than 3mm and is by nature is a welding process that produces spatter which can adhere to parts, welding jigs, inside the nozzle requiring additional clean up time. Most of the spatter is produced when the process changes state between shorting and arcing which can occur over one hundred times per second. This change results in huge changes in are to control the volatility during the change of state between short and arc to control the amount and size of the spatter generated.

HSS—High Speed Spot Technology


Comparing with the standard spot welding, High Speed Spot is an great improvement. It offers a faster travel speed and better welding performance,  especially for thin (less than 2mm) pipes or frame/structure welding jobs, like the furnitures etc.

Robot Welding Ready




The PROMIG-500SYN DPulse system is able to work with robot.
Capable for 485 protocol.

VIDEO

SPECIFICATIONS
Machines
Product Name
ProMIG-500SYN DPulse
Machines Processes
Stick (SMAW) Flux-Cored (FCAW) 
MIG (GMAW)
 Pulsed MIG (GMAW-P) 
Double Pulsed MIG (GMAW-DP)
 High Speed Pulsed MIG (GMAW-HSP)
Machines Communication
Analog
Digital
Wifi
Wire Feeder
4-Rollers
Product Weights & Dimensions
Dimensions(L*W*H)
960x420x1400mm
Net Weight
107kg
Basic Specification
Input Voltage
3PH ~ 400V ±15%
Input Power
24.08KVA
Output Range
MIG: 30A/15.5V~500A/39V
Rated Output(40℃) 100%
MIG: 500A/39V
Polarity
DC
SPECIFICATION

YOU MAY ALSO NEED
Push Pull 401W
SGT 18
Foot Pedal
Carriage

Productos Relacionados
    ¿ALGÚN COMENTARIO? ¡ERES BIENVENIDO A DEJARNOS UN MENSAJE!
    *Email
    Teléfono
    *Título
    *Contenido
    Subir
    • Solo admite .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, máximo 20M
    Evaluacion
    • Cargando...